R5915190 /00
IEX
42
IEX SE
R
IES
3.3.4.3 Replace Module with Flash
The module of IEX has Flash, which can save the calibration coefficient. After replacing
the module, make sure that the receiving have read coefficient from the Flash and save.
Click
Setting
on the main window and select
Module Flash
,
as shown in following fig.
Main Window
Click
Check Coefficient in Modules
, the receiving card will read coefficient from
module, then
Click Save Calibration Coefficient on Receiving Card
Figure 3-23 Save Calibration Coefficient on Receiving Card
Summary of Contents for IEX Series
