R5915190 /00
IEX
47
IEX SE
R
IES
Figure 3-29 Starting Point Setting
6)
Selecting a correction coefficient file for the module of the corresponding area;
after importing the calibration file, click "Send" to enable brightness correction;
Figure 3-30 Brightness Calibration
7)
Open the LED screen setting window, on the screen parameter page :select
“Brightness” in the “Calibration Mode”, select “From Receiver Card” in the
“Correction”, and then click “Save to Receivers”.
Summary of Contents for IEX Series
