![background image](http://html1.mh-extra.com/html/barco/id-h250/id-h250_owners-manual_4180871057.webp)
7. Advanced
On the screen appears now a slider box
Image 7-22
8. Use
←
or
→
, the numeric keys on the remote, or the keypad to change the Noise Reduction
7.5.2
Aspect ratio
Aspect ratios
The standard aspect ratio used in broadcast television is the 4:3 ratio. However, most of the DVD sources use nowadays the wide
screen 16:9 or even the Cinemascope
TM
2.35:1 aspect ratio.
Some DVD sources may even use the anamorphic 16:9 or anamorphic 2.35:1 to take advantage of the higher vertical resolution
offered by the 4:3 ratio. The “anamorphic” term means that the original wide screen image is squeezed in order to fit the 4:3 aspect
ratio.
4:3
16:9
2.35:1
Image 7-23
Common non- anamorphic aspect ratios in DVD sources
16:9
2.35:1
Image 7-24
Anamorphic aspect ratios in DVD sources
What can be done ?
The aspect ratio setting forces the projector to project an image using a defined aspect ratio :
•
4:3
•
16:9
•
5:4
•
Auto
The settings do not refer to the aspect ratio of the source !
R59770079 BARCO ID H250/500 23/07/2007
53
Summary of Contents for iD H250
