![background image](http://html1.mh-extra.com/html/barco/icp-d/icp-d_installation-manual_3854739021.webp)
21
R5912083 /01
ICP-D
3.2 Process overview of ICP-D installation
Process overview
1.
Make free the slots dedicated to ICP-D and IMB (Integrated Media Block) boards. See location in
“
, page 14.
Note:
When replacing ICP by ICP-D you have to remove the metal plate located in between the
ICP and the IMB. This plate is no longer useful and should not be installed with an ICP-D.
2.
Use information (QR code and/or serial number) on CertID label located on the top of the security module
of the ICP-D to obtain device certificate. See procedure
Obtaining the Barco ICP-D certificate
, page 24.
3.
Install the new ICP-D into the Card Cage of the projector. See procedure
”
, page 22.
4.
Install the IMB in the appropriate location in the Card Cage (just below ICP-D). See installation procedure
provided with the IMB board (3rd party device manual).
5.
Clear the security warning/tamper that is automatically raised when a module is removed from the
projector.
Depending the projector series:
•
On series 2 projector, use an authorization pin code and/or security key to clear the security warning.
See procedure
Authorization to clear a security warning on series 2 projector
, page 25.
•
On series 4 projector, use the configuration software with an authorization pin code. See procedure
“
Authorization to clear a security warning on the projector
, page 27.
6.
On series 4 projector only, use the configuration software to install license needed to use the third-party
IMB with ICP-D. See procedure
“
, page 29.
7.
On series 4 projector only, activate the legacy protocol in order to using basic commands such as Light
ON/OFF, Dowser Open/Close, Execute Macro... like as used by third party equipment on Series 2
projectors. See procedure
”
, page 31.
8.
(Option) Contact your Barco retailer to obtain the HDMI2.0_HDR license based on the serial number of
ICP-D. Then, use the configuration software to install this license. See procedure
“
, page
9.
Upgrade all software to the latest available version.
Depending the projector series:
•
On series 2 projector, check if the ICP-D has been correctly updated with the last software version
available (see
Checking software version on series 2 projector
, page 32). Then, if it is necessary, use
the procedure
Series 2 projector software update
”
, page 34 to update the software in a specific
version.
•
On series 4 projector, check if the ICP-D has been correctly updated with the last software version
available (see
, page 33). Then, if it is necessary, use the procedure
“
”
, page 35 to update the software in a specific version.
10.
Finishing the projector setting by using the configuration software to:
1. load a clone package corresponding to the projector type and related to the chosen configuration (e. g.
dedicated to ICP-D),
2. then, create configuration files (
screen
files and
input
files),
3. and finally, perform color calibration for all formats.
Summary of Contents for ICP-D
