![background image](http://html1.mh-extra.com/html/barco/icp-d/icp-d_installation-manual_3854739031.webp)
31
R5912083 /01
ICP-D
3.9 Activate legacy protocol
Required tools
Web Communicator
When is it necessary to activate Legacy protocol?
Legacy protocol must be activated when a third party equipment need to send API over Ethernet commands
to the SP4K projector using the legacy protocol as used on Series 2 projectors. A third party equipment could
be a TMS, an automation device, an IMB/IMS installed in the projector or any other equipment which need to
operate the SP4K projector. The commands available are controlling the basic features of the projector such
as Light ON/OFF, Dowser Open/Close, Execute Macro
…
How to activate Legacy protocol
1.
Browse to the Web Communicator application and log in as administrator.
2.
Click on tab
Configuration
and select
System access
.
3.
While in
Configuration
>
System acces
s >
Network configuration
, check the check box in front of
Allow
legacy protocol
(reference 1).
1
-D
ICP-D
ICP-D
ICP-D
ICP
ICP-D
ICP
ICP-D
Image 3
–
10
Summary of Contents for ICP-D
