![background image](http://html1.mh-extra.com/html/barco/icon-h600/icon-h600_installation-manual_3844700024.webp)
3. (Re)placing the RGB input on iCon H600
Image 3-34
6. Remove the board from the input frame
How to mount the (new) input board
1. Insert the (new) board into the empty slot and place it slightly tilted downwards at the right side.
Image 3-35
Note:
Positioning the board horizontally will not be possible at this moment.
2. Bring the connectors on the board in front of the connectors on the PMP and tighten the side screw on the PMP.
Image 3-36
Caution:
Tightening the screw too much can damage the connectors !
20
R5976888 RGB/VIDEO INPUT KIT 30/07/2008
Summary of Contents for iCon H600
