![background image](http://html1.mh-extra.com/html/barco/icon-h600/icon-h600_installation-manual_3844700016.webp)
3. (Re)placing the RGB input on iCon H600
Image 3-13
2. Remove the 4 screws
fi
xing the VGA and the RS232 connector
Image 3-14
3. Remove the 2 screws
fi
xing the USB connectors.
Note:
the 2 screws are
fi
xed with 2 nuts on the rear of the plate : remove gently the plate forwards to access the nuts.
Image 3-15
Tip:
In case one must only access the side screws on the PMP it is not necessary to loosen the USB connector.
4. Remove the plate or
fl
ip it to the side in case the USB connector has not been removed.
12
R5976888 RGB/VIDEO INPUT KIT 30/07/2008
Summary of Contents for iCon H600
