4. Installation
1
2
3
4
Image 4-6
The configuration should also be communicated to the projector. This is done in the
Installation
menu through
the
Projector Configuration
parameter. (See Setup section)
4.7
Positioning the projector
On-Axis projection
Projection where the projector is positioned so as to have the centre of the lens coinciding with the centre of the screen.
Positioning the projector
The position of the projector with reference to the screen may also be different depending on the installation. Basically the projector
can be positioned in an On-Axis or Off-Axis configuration. Several parameters can be calculated determining the position in any
installation.
R5976992 ICON H250/400 13/12/2006
15
Summary of Contents for iCon H250
