Barco HDX series, User And Installation Manual

Page: 183 / 340

12. Alignment
4. To adjust a value once selected, use the ◄ or ► key to change
Or,
press
ENTER to open a separate adjustment window.
Use the arrow keys to make the adjustment.
Image 12-40
Warping, keystone
About Warp area
2 1 3 4 5 6
Image 12-41
Warp area
1 Full screen
2 Right side
3 Bottom side
4 Left side
5 Top side
6 4 quadrants
About Warp mode
2 1 3 4 5 6 7
Image 12-42
Warp mode
1 Keystone
2 Linearity
3 Points
4 Scale
5 Shift
6 Rotate
7 Rotation point
12.8.8 Keystone correction work fl ow
Adjusting vertical and horizontal keystone
1. Select the 2 x 2 adjustment level. See "Setting the warping level", page 177.
The default selected anchor point is the left top corner of the image.
2. Select the desired warp area.
Depending on the selected area only the points in that area will be adjusted.
3. Select keystone .
4. Select within Warp Adaptations , Horizontal or Vertical to adjust the corresponding keystone.
R5905032 HDX SERIES 20/11/2014 179