Barco HDX series User And Installation Manual Download Page 165

Page: 165 / 340

11. Lamp

11.9 CLO targets

What must be done?

The light output target can be set. This value will force the projector to produce the target lumens when the CLO mode is set to

On.

How to set the target

1. Press

Menu

to activate the menus and select

Lamp

→

Power

→

CLO mode

Image 11-25
Main menu, lamp

Image 11-26
Lamp, power

Image 11-27
CLO Target lumens setup

2. Use the

◄

►

key to change the CLO target lumens.

Depending on the projector model, the value range can be different. The screenshot is only given as information. For the exact
values, see the speci

cations of the speci

c projector.

11.10 LPS power

What is indicated ?

The current LPS power in watt is indicated as information.

R5905032 HDX SERIES 20/11/2014

161

Summary of Contents for HDX series





















































































































































































































































































































































Search results

Summary of Contents for HDX series

Reviews:

Barco HDX series, User And Installation Manual, Page: 165 / 340

Search results

Summary of Contents for HDX series

Reviews: