Barco HDX series, User And Installation Manual, Page: 128 / 340

9. Image
Depending on the File Load Filter setting a full list or a list fi tting the selected source is displayed.
When staying for at least 3 seconds on the same fi le selection after scrolling through the list of image fi les a pre-load is started.
Image 9-63
Load
fi le
3. Use the ▲ or ▼ key to select the desired fi le and press ENTER to load this fi le.
The image is not perfect
If the displayed image is not correct after selecting the best fi tting fi le, go to the Timings menu and change the fi le settings.
9.6.3 File Load Filter
About the fi lter setting
Depending on the load fi le fi lter, the load list can be reduced to the fi tted fi les or can be expanded to show all fi les.
[Fit] : reduced list corresponding with the input source.
[All] : full list with all available fi les in the projector.
How to set up
1. Press Menu to activate the menus and select Image → Image File Services → File Load Filter .
Image 9-64
Main menu, Image
Image 9-65
Image, image
fi le services
124 R5905032 HDX SERIES 20/11/2014