1. HDx 3D Input Module
3D INPUT
R9864140
3D SYNC IN DISPLAYPORT
HDMI
3D SYNC OUT
SYNC
SEL
SYNC
SEL
BARCO
Image 1-2
Input Speci
fi
cations
•
HDMI™
(High-De
fi
nition Multimedia Interface)
HDMI: Supports 3D and Deep Color up to 12 bit per color (36-bit mode).
•
DisplayPort
DisplayPort 1.1a up to 210 MHz pixel clock. Support for ‘Deep Color’ up to 12 bit per color.
The 3D SYNC IN/OUT only works if the module is inserted in slot 3 or 4 of the Input
Communication Unit. (See installation procedure).
1.2
Physical installation
Requirements
•
The projector software must be version V1.4.x or higher.
•
The Projector Toolset must have version V2.6 to support the HDx 3D Input Module.
•
Use latest version of the User Guides for the Projector and the Projector Toolset.
Projector software (update package), Projector Toolset, and User Guides can be down-
loaded from the Barco secured website
https://my.barco.com
.
What needs to be done?
First the version of the installed projector software has to be checked. Then the HDx 3D Input Module
has to be installed in one of the free slots of the Input & Communication Unit of the projector. For that the
dummy cover of the free input slot has to be removed.
Necessary tools
•
PH2 Phillips screwdriver.
•
Projector Toolset version V2.6
Installing the HDx 3D Input Module
1. Check the version of the installed projector software. Projector software must be version V1.4.x or
higher.
Download latest projector software from
https://my.barco.com
and upgrade if necessary. See User
Guide of the projector or Projector Toolset.
2. Switch off the projector.
3. Remove the dummy cover from one of the two free input slots (slot 3 or slot4, reference 1) at the bottom
of the Input & Communication Unit. Use a PH2 Phillips screwdriver to loosen the two retaining screws
(reference 2) of the dummy cover. (image 1-3)
2
R5905197 HDX 3D INPUT MODULE 09/10/2012
