1. HDx 3D Input Module
4. Insert the HDx 3D Input Module into the free input slot. Make sure the module seats in its sliders. Push
in the module until the contacts are fully inserted into the connectors. (image 1-4)
5. Fasten the two retaining screws (reference 3) of the HDx 3D Input Module. Use a PH2 Phillips screw-
driver. (image 1-5)
6. Connect a 3D input source with the HDx 3D Input Module.
7. Power up the projector.
8. Verify with the Projector Toolset (version V2.6) if the projector recognizes the HDx 3D Input Module and
that the HDx 3D Input Module has the latest
fi
rmware installed.
The projector is now ready to apply a 3D source to the HDx 3D Input Module.
2
1
Image 1-3
Image 1-4
R5905197 HDX 3D INPUT MODULE 09/10/2012
3
