![background image](http://html1.mh-extra.com/html/barco/hdf-w30lp/hdf-w30lp_user-and-installation-manual_4170176275.webp)
21. Maintenance procedures
21. MAINTENANCE PROCEDURES
About this chapter
This chapter contains general servicing procedures like light source unit replacement, input unit replacement etc. These procedures
may only be performed by
quali
fi
ed technical service personnel
.
Overview
•
•
•
lter of the standalone cooling unit
•
•
•
•
Cleaning the exterior of the projector
•
Extra service information
Extra service information for quali
fi
ed service technicians can be found on Barco’s Partnerzone (URL:
http:\\my.barco.com
). Regis-
tration is necessary.
If you are not yet registered, click on Partnerzone registration and follow the instructions. With the created login and password, it is
possible to enter the partnerzone where you can
fi
nd extra service information about the projector.
W
ARNING
:
Switch off the projector and unplug the power cord before starting the procedure.
W
ARNING
:
Maximum service time is limited to 2 hours due to possible UV radiation.
The air
fi
lters should be cleaned monthly under normal environment conditions. Equipment in very dusty or
otherwise contaminated areas may require more frequent maintenance.
If the air
fi
lters are not regularly cleaned, the air
fl
ow inside the projector could be disrupted and cause over-
heating. Overheating may lead to the projector shutting down during operation.
21.1 Replacement of the dust
fi
lter on the front side
Necessary parts
New HEPA dust
fi
lter for the front side (R9854470).
How to replace the HEPA dust
fi
lter on the front side
1. Remove the front cover of the projector, see "Removal of the front cover", page 279.
2. Remove the HEPA dust
fi
lter on the front side by pulling the two spring clamps away from the
fi
lter and then moving the
fi
lter
forwards.
R5906730 HDF WLP SERIES 01/08/2017
271
Summary of Contents for HDF-W30LP
