![background image](http://html1.mh-extra.com/html/barco/hdf-w30lp/hdf-w30lp_user-and-installation-manual_4170176279.webp)
21. Maintenance procedures
Necessary tools
Vacuum cleaner with soft brush suction nuzzle.
How to vacuum-clean the dust
fi
lter?
1. Carefully vacuum the air inlet side of the dust
fi
lter. Use a vacuum cleaner with a soft brush suction nuzzle. The air inlet side of
the dust
fi
lter is the side which is surrounded with a glue edge.
Tip:
Lightly tap the
fi
lter on its dusty side to expel heavy dust contamination.
Tip:
Compressed air is also permitted to clean the
fi
lters but take care not to damage them.
Caution:
Do not damage the dust
fi
lter. Replace damaged dust
fi
lters immediately.
21.5 Washing and drying the dust
fi
lters
C
AUTION
:
This procedure only concerns the washable
fi
lters. Under no circumstances HEPA
fi
lters (High-
ef
fi
ciency particulate arresting) should be washed. An used HEPA
fi
lter must be systematically replaced.
About
fi
lter washing and drying
For environments where popcorn grease and such can contaminate the
fi
lters, Barco advises the client to purchase one extra set
of
fi
lters to cover drying time, as well as taking following extra precautions and instructions pertaining to
fi
lter cleaning and drying.
Cleansing agent
To clean sticky, greasy dust
fi
lters we suggest usage of
Sodium carbonate
crystals (Na
2
CO
3
). Sodium carbonate (Often called
washing soda
,
soda crystals
, or
sal soda
in the detergent section of stores) is widely used to effectively remove oil, grease, alcohol
stains … The product itself is relatively safe, sodium carbonate is used in toothpastes and as a food additive (E500). Potential
Hazards are described in the section "Hazards", page 287.
Image 21-7
Sodium carbonate crystals.
This cleaning procedure assumes that the
fi
lters are already removed from their slots.
Take into account that the time needed to dry the dust
fi
lters may be 24 hours or more. For that, it’s recom-
mended to have a second set of dust
fi
lters which can be used while cleaning the
fi
rst set.
Necessary tools
•
Bucket with hot water.
•
Sodium carbonate, 30 gram (handful) per liter hot water.
How to wash and dry the dust
fi
lters?
1. Make a solution with a ratio of 30 gram (a handful) sodium carbonate to 1 liter
hot water
.
2. Soak the dust
fi
lters in the solution for
30 to 60 minutes
. The grease should be dissolved after 1 hour.
3. If the dust
fi
lter is still clogged repeat this procedure from step 1.
R5906730 HDF WLP SERIES 01/08/2017
275
Summary of Contents for HDF-W30LP
