Barco HDF W22, User And Installation Manual, Page: 247 / 453

12. Alignment
12.8.10 Selecting and changing the position of a speci fi c point
About point selection
Depending on the warp level, number of selectable points, a speci fi c point can be selected and moved in any direction. The coordi-
nate system works with 33 x 33 pixels (0 to 32). Depending on the warp level the cursor will jump from active point to active point.
E.g. for 5 x 5 the fi rst point has coordinates (0,0), the second point in horizontal direction will have coordinates (12,0), etc. .
How to select a point
1. Select the warp level (1).
1
3
2
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23 24 26 25 27 28 30 29 31 32
1
21
11
6
16
5 3 2 4
25
15
23
13
24 22
10
20
8
18
12
14
7 9
19
17
Image 12-46
Point selection
2. Select Warp mode points (2).
3. Use the ▲ or ▼ key to go to Point selection.
4. Select alternating the X and Y coordinate and change the value (3).
Or,
press
ENTER to open the point selection window.
Use the 4 arrow keys to select the desired point.
Press
ENTER to the Warping adaptations.
Image 12-47
Point selection Image 12-48
Moving selected point
5. Use the 4 arrow keys to change the position of the selected point.
R5905158 HDF SERIES 08/12/2016 243