![background image](http://html1.mh-extra.com/html/barco/galaxy-warp-r9040320/galaxy-warp-r9040320_owners-manual_4159942026.webp)
4. Connections
How to select RGB on input 1?
1. Press the
1
key on the RCU or Local Keypad.
How to change the input slot setting?
1. Press
ADJUST
or
ENTER
key to start up the
Adjustment Mode
.
2. Push the cursor key
↑
or
↓
to select
Installation
3. Press
ENTER
to select.
The
Installation
menu will be displayed.
4. Push the cursor key
↑
or
↓
to select
Input Slots
. (menu 4-3)
5. Press
ENTER
to select.
The internal system will scan the inputs and displays the result in the
Input Slots
menu, only Input 1 is available. (menu 4-4)
6. Press
ENTER
to toggle between RGB-SS or RGB-SOG.
ADJUSTMENT MODE
Select a path from
below
RANDOM ACCESS
INSTALLATION
SERVICE
Source 1
Select with
↑
or
↓
then <ENTER>
Menu 4-2
INSTALLATION
INPUT SLOTS
NO SIGNAL
LENS
MENU POSITION [CENTER]
800-PERIPHERAL
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 4-3
INPUT SLOTS
SLOT SELECTION [AUTOMATIC]
X SLOT 1 : RGB - SOG
- SLOT 2 : DVI
Select with
↑
or
↓
<ENTER> to toggle
<EXIT> to return
Menu 4-4
Possible indications on the input slot menu.
•
RGS-SS [CV or HS&VS] = RGB analog signals, separate sync is composite sync or horizontal and vertical sync.
•
RGB-SOG = RGB analog signals with sync on green.
When changing from an analog signal on the RGB Input to the DVI Input the indication led on the front panel of the module will
switch from the RGB Input to the DVI Input.
4.5.3
Input 2
Input 2 specifications
Input 2 has a DVI plug for DVI input.
Which signals can be connected to input 2?
DVI signals can be connected to the DVI input connector.
The DVI input can not be used for Stereo Sources.
Pin assignment for the DVI connector.
Pin 1
TMDS DATA2-
Pin 13
TMDS DATA3+
Pin 2
TMDS DATA2+
Pin 14
+5 Power
Pin 3
TMDS DATA2/4 Shield
Pin 15
Ground (for +5V)
Pin 4
TMDS DATA4-
Pin 16
Hot Plug Detect
Pin 5
TMDS DATA4+
Pin 17
TMDS DATA0-
Pin 6
DDC Clock
Pin 18
TMDS DATA0+
Pin 7
DDC Data
Pin 19
TMDS DATA0/5 Shield
Pin 8
No connect
Pin 20
TMDS DATA5-
22
R5976570 BARCO GALAXY WARP™ 25/03/2004
Summary of Contents for Galaxy WARP R9040320
