R5910886 /02
G60
4
•
The instructions for the assembly, operation, and maintenance include clear warnings concerning precautions to avoid possible
exposure to hazardous laser radiation.
Laser safety precautions for G60-W10 series
This product is classified as Class 1 Laser Product-Risk Group 2 (RG2 ) of IEC 60825-1: 2014 and Class 3R Laser product of IEC 60825-
1:2007, complying with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No.50, dated June 24, 2007.
When installed with G LENS (2.90 - 5.50 : 1) lens (throw ratio 2.90-5.50), this projector may become Class 1 Laser Product-Risk Group 3
(RG3) according to IEC 60825-1:2014, IEC 62471:2006, IEC 62471-5: 2015, and also complying with Immediately in Effect Guidance
Document: Classification and Requirements for Laser Illuminated Projectors (LIPs) Guidance for Industry and Food and Drug
Administration Staff Document issued on February 18, 2015.
To ensure safety operation, read all laser safety precautions before installing and operating the projector.
•
This projector uses extremely high brightness laser. Do not stare into the direct light beam, as the extremely high brightness may
cause permanent eye damage. (Risk Group 2 of IEC 62471-5:2015).
•
No direct exposure to the beam shall be permitted. (Risk Group 3 of IEC 62471-5:2015).
•
This product is not for household use.
•
Possibly hazardous optical radiation emitted from this product.
•
This projector has a built-in Class 4 laser module. Never attempt to disassemble or modify the laser module.
•
Any operation or adjustment not specifically instructed in the User manual creates the risk of hazardous laser radiation exposure.
•
Do not stare into beam when the projector is on. When turning on the projector, make sure no one within projection range is looking
into the lens.
•
Follow the control, adjustment, or operation procedures to avoid damage or injury from exposure of laser radiation.
•
The instructions for the assembly, operation, and maintenance include clear warnings concerning precautions to avoid possible
exposure to hazardous laser radiation.
Light Intensity Hazard Distance for G60-W8 series
This projector may become CLASS 1 LASER PRODUCT - RISK GROUP 3 when installed with G LENS (2.90 - 5.50 : 1) lens (throw ratio
2.90-5.50). Permanent eye injury is possible when exposed to the high intensity light beam within the hazard distance.
Projection Lens
Throw Ratio
Classification and Requirements for Laser Illuminated Projectors
(LIPs)
G LENS (2.90 - 5.50 : 1)
2.90-5.50
World wide except US
(IEC 60825-1:2014)
For US only
(IEC 62471:2006)
CLASS 1
RISK GROUP 3
HD: 2.15 meters
Follow the precautions to avoid light intensity hazard.
•
NEVER look into the lens! High intensity light beam.
•
Permanent eye injury is possible when exposed to the high intensity light beam within the hazard distance.
•
Do not place any reflective objects in the light path of the projector.
Light Intensity Hazard Distance for G60-W10 series
This projector may become Class 1 Laser Product-Risk Group 3 (RG3) when installed with G LENS (2.90 - 5.50 : 1) lens (throw ratio 2.90-
5.50). Permanent eye injury is possible when exposed to the high intensity light beam within the hazard distance (HD).
Projection Lens
Throw Ratio
Classification and Requirements for Laser Illuminated Projectors
(LIPs)
G LENS (2.90 - 5.50 : 1)
2.90-5.50
World wide except US
(IEC 60825-1:2014)
World wide except US
(IEC 62471-5: 2015)
For US only
(IEC 62471:2006)
CLASS 1
RISK GROUP 3
HD: 3.0 meters
RISK GROUP 3
HD: 8.0 meters
Follow the precautions to avoid light intensity hazard.
•
NEVER look into the lens! High intensity light beam.
•
Permanent eye injury is possible when exposed to the high intensity light beam within the hazard distance.
•
Operators shall control access to the light beam within the hazard distance or install the product at a height that will prevent eye
exposure within the hazard distance.
•
Do not place any reflective objects in the light path of the projector.
User definition
Throughout this manual, the term SERVICE PERSONNEL refers to Barco authorized persons having appropriate technical training and
experience necessary to be knowledgeable of potential hazards to which they are exposed (including, but not limited to HIGH VOLTAGE
ELECTRIC and ELECTRONIC CIRCUITRY and HIGH BRIGHTNESS PROJECTORS) in performing a task, and of measures to minimize
the potential risk to themselves or other persons. Only Barco authorized SERVICE PERSONNEL, knowledgeable of such risks, are
allowed to perform service functions inside the product enclosure. The term USER and OPERATOR refers to any person other than
SERVICE PERSONNEL. When installing an interchangeable lens with a throw ratio that make the projector become RG3, refer to chapter
“
Risk Group 3 Safety
”
, page 9. Such combination of projector and lens are intended for professional use only, and are not intended for
consumer use.
