R5910886 /02
G60
8
Label image
Label description
This product is classified as Class 1 Laser Product-Risk Group 2 of IEC 60825-1:2014
and also complies with 21 CFR 1040.10 and 1040.11 as a Risk Group 2, LIP ( Laser
Illuminated Projector) as defined in IEC 62471:2006 except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007.
Warning! Do not look into the beam. No direct eye exposure to the beam
is permitted. Not for household use.
RG3 Hazard Distance: Refer to the manual.
Avertissement! Ne regardez pas à l'intérieur du faisceau. L'exposition
directe des yeux au faisceau est interdite.
RG3 Distance à risque: Consultez le manuel.
!
.
. R G 3
:
IEC60825-1:2014 Class 1 Laser Product Risk Group 3
This projector may become Class 1 Laser Product-Risk Group 3 of IEC 60825-1:2014
when installed with G lens - Ultra Long Zoom (throw ratio 2.90 - 5.50 : 1).
Light beam related safety labels for G60-W10 series
Label image
Label description
This product complies with performance standards for laser
products under 21 CFR Part 1040 except with respect to those
characteristics authorized by Variance Number XXXX-X-XXXX
effective [insert the date of the variance approval]
BARCO INC
3059 Premiere Parkway Suite 400, Duluth, GA 30097, USA
U.S.A. Only
FDA laser variance (US projectors only)
This product is classified as Class 1 Laser Product-Risk Group 2 of IEC/EN 60825-
1:2014 and Class 3R Laser product of IEC/EN 60825-1:2007, complying with 21 CFR
1040.10 and 1040.11 except for deviations pursuant to Laser Notice No.50, dated
June 24, 2007.
This projector may become Risk Group 3 product when an interchangeable lens with
throw ratio greater than 2.9 (G lens - Ultra Long Zoom) is installed. Refer to the
manual for the lens list and hazard distance before operation. Such combinations of
projector and lens are intended for professional use only, and are not intended for
consumer use.
Not for household use.
No direct exposure to beam shall be permitted, which can cause injury to the retina in
the back of the eye.
1.4 Risk Group 3 Safety
1.4.1 General considerations
Notice on optical radiation from G60 Projector when it becomes Risk Group 3.
•
For RG3, no direct exposure to the beam shall be permitted.
For RG3, operators shall control access to the beam within the hazard distance or install the product at a height that will prevent eye
exposure within the hazard distance.
•
This projector has one or several built-in Class 4 laser clusters. Disassembly or modification is very dangerous and should never be
attempted.
•
Any operation or adjustment not specifically instructed by the user
’
s guide creates the risk of hazardous laser radiation exposure.
•
Do not open or disassemble the projector as this may cause damage by the exposure of laser radiation.
FOR PROFESSIONAL USE ONLY means installation can only be carried out by Barco AUTHORIZED PERSONNEL familiar with
potential hazards associated with high intensity light beams.
WARNING:
No direct exposure to the beam within the hazard distance shall be permitted, RG3 (Risk Group 3) IEC EN
62471-5:2015
CAUTION:
Use of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
