Barco FL40-4K, User Manual

Page: 48 / 64

R5913251 /00 FS-FL40 MKII series 48
6.1 Profiles introduction
About Profiles
The Profile function make it possible to store different profiles / projector setups for different use cases, and
quickly recall them when needed. This means that there is not necessary to enter a lot of different menus to
adjust the projector setup for different user cases.
As examples of different user cases are setup for video, gaming, different viewing environments and so on.
This is useful in installations where the projector are used for different purposes.
Image 6 – 1
6.2 Profiles setup parameters
Available profile settings
Area of interest
Settings
Source Currently selected source
Image
• Brightness
• Contrast
• Gamma (Value and type)
• Intensity
• Saturation
• Sharpness
• Output resolution (e.g. 4K UHD, 4K UHD S or WQXGA on a WQXGA
UDX)
• Digital Zoom (Enabled status and factor)
• Digital Shift (Enabled Status, X and Y)
PQ
• Screen luminance
• HDR boost value
Realcolor
• Brilliant Color mode
• P7 desired values
• P7 measured values
Installation
• Lens parameters, if available (only valid if recalled with same lens)
-
Iris
- Focus
- Zoom
• Lens shift (Vertical / Horizontal)
GUI – Profiles