Barco FL40 - 4K, User Manual

Page: 68 / 126

R5910123 /00 FL40 / FS40 Projectors
68
Image 7-11
2. Choose one of the pre-defined presets:
• Native : Projector native color settings. Default setting
• EBU : European color standard for broadcasting
• SMPTE-C : American color standard for broadcasting.
• Rec. 709 : Color standard for high-definition televisions (HDTV).
Image 7-12
Note: When choosing one of the presets, All other options in the P7 menu are disabled.
How to set custom P7 values
1. In the main menu, select Image → Advanced → P7 Realcolor .
The P7 menu is displayed.
2. Select the desired Mode . Choose one of the following custom options:
• Custom RGB : 3 – point color configuration.
In RGB mode, the C, M and Y coordinates will be calculated automatically based on the R, G and B
coordinates.
• Custom RGBCMY : 6 – point color configuration (both RGB and CMY).
In RGBCMY mode, each color can be given a specific coordinate within the measured color triangle.
• Custom WHITE : Configure only the White temperature.
3. Define the coordinates for each available color.
Click on a coordinate value and select the current value. Enter the desired value with the numeric keys.
Note: You can only pick coordinates within the measured color triangle.
4. For Custom White , click on White point and choose one of the following:
• Coordinates : Configure the white point via specific coordinates.
The white point is specified using an x, y coordinate in the CIE 1931 Chart.
• Temperature : Configure the white point via a color temperature slider.
Image menu