40
13.
COMMUNICATION LINK
13.1.
Serial RS232 Interface
A serial RS232 interface allows for the remote control of the monitor.
The most important operating parameters can be set by the serial interface
RS232 DSUB-9 connector:
Pinout:
1
not used
6
not used
2
Tx-Data
7
not used
3
Rx-Data
8
not used
4
not used
9
not used
5
Ground
13.2.
LAN Interface
A LAN interface is provided to allow the following function:
single LAN connection (default) with connector located on the backside, internally routed to the serial link
for controlling the monitor (RS-232 <> TCP/IP conversion)
Connector type: RJ-45, located on the back side
NOTE:
the RS232 and Ethernet communication links, are only intended to be used by Service Personnel
