32
11.2.
OSD Controls (ON Screen Display)
Trough the OSD menu, any user available function can be easily and intuitively accessed.
11.2.1.
Working in the OSD Menu
1) Press the
Enter
key to display the OSD MENU (or the request to input the password, if enabled)
2) Press the
Up +
or
Down
–
keys to move upward / downward the highlight selection of menu item
Press again the
Enter
key to select the highlighted sub-menu (if available) or to select an
adjustable parameter.
3) If an adjustable parameter has been selected, press the
Up +
or
Down
–
keys to adjust it.
4) Pressing the
Esc
key, the current menu window is replaced by the „upper‟ menu window.
5) Press the
Esc
key to go back to the root OSD menu level and then to exit from the OSD.
11.2.2.
Main OSD Menu
Press the
Enter
key to display the Main Menu (or the request to input the password, if enabled);
the cursor (
) is ready on the first item.
By selecting the
MONITOR INFO
item and pressing the
Enter
key, the relative window will appear:
here following the meaning of each item of this menu:
11.2.3.
Monitor Info
- HWREL
Hardware release
- FWREL
Firmware release
- DVI PWR IN
Current status of DVI 5V power input
- DVI PWR OUT
Current status of DVI 5V power output
- REMAIN LIFE
Expected remaining life-time (in hours) of LCD panel lamps
MONITOR INFO
HWREL
LP2
FWREL
2.00
DVI PWR IN
ON
DVI PWR OUT
ON
REMAIN LIFE
12.000
-> MONITOR INFO
OUT MODE
USER SETTING
OSD SETTING
PRODUCT INFO
SERVICE
