![background image](http://html1.mh-extra.com/html/barco/f90-w13wuxga/f90-w13wuxga_user-manual_4186791053.webp)
6. Source menu
6. SOURCE MENU
About the Source menu
This menu is used to select, review and con
fi
gure sources into the projector. Enables either via the source menu, or the shortcut key.
By navigate through the Home/Source menu, it will be visible also on the OSD.
By using the shortcut key, the menu occurs only on the LCD display.
Overview
•
•
•
6.1
Connector selection
About
Home/Source
Image 6-1
Source Menu. (Scroll for more choices).
Click on the relevant input connector icon to swap or activate the source.
The icon for the active source is highlighted.
The list of displayed sources can be adjusted to include other connectors.
The default selection of connectors displayed is:
•
Display Port 1
•
Display Port 2
•
Dual Displayport Columns
•
Dual Displayport Sequential
•
DVI 1
•
DVI 2
•
Dual DVI Columns
•
Dual DVI Sequential
•
HDBaseT
•
HDMI
•
SDI
6.2
Connector Settings
About Connector Settings
The Connector Settings menu allows you to change settings for each input connector of the projector.
By default all options for every connector are set to automatic, together with the native Extended Display Identi
fi
cation Data (EDID).
601–426 F70 SERIES 24/10/2017
49
Summary of Contents for F90 - W13WUXGA
