![background image](http://html1.mh-extra.com/html/barco/f50/f50_user-manual_3935088036.webp)
36
User Manual - Introduction
english
5.7 Installation main menu
image orientation
:
Rotate the image on the imaging device in desktop front, desktop rear, ceiling
front, ceiling rear.
source scan
:
Search through all input connectors for an active signal or stay on one connector.
IR front
Enable or disable front IR-receiver.
IR rear
Enable or disable rear IR-reciever.
OSD enable
:
Sets how the OSD messages should appear.
On:
All OSD messages are shown.
Only warnings:
Only critical OSD messages are shown.
Off:
No OSD messages are shown. The OSD menu is still accessible by clicking
menu on either the remote or the keypad.
test image:
Displays internal test images for projector alignment and setup. Option to show
4:3, 16:9, 16:10, 1.85:1, 2.35:1, 5:4, combined, off
4:3:
fills the imaging device with a white image, but marks out the 4:3 area in the
center of the image.
16:9:
fills the imaging device with a white image, but marks out the 16:9 area in
the center of the image.
16:10:
fills the imaging device with a white image, but marks out the 16:10 area
in the center of the image.
1.85:1:
fills the imaging device with a white image, but marks out the 1.85:1 area
in the center of the image.
2.35:1:
fills the imaging device with a white image, but marks out the 2.35:1 area
in the center of the image.
5:4:
fills the imaging device with a white image, but marks out the 5:4 area in the
center of the image.
Combined:
fills the imaging device with a white image and marks out the all of
the above aspect ratios.
sync termination VGA
:
Enable sync termination to 75 Ω /2.2 kΩ
sync termination SYNC1
:
Enable sync termination to 75 Ω /2.2 kΩ
sync termination SYNC2
:
Enable sync termination to 75 Ω /2.2 kΩ
sync termination SYNC3
:
Enable sync termination to 75 Ω /2.2 kΩ
DisplayPort 1 eq
Choice between
Normal
and
High
(enables receiving signals via longer cables/with a higher bit rate)
DisplayPort 2 eq
Choice between
Normal
and
High
(enables receiving signals via longer cables/with a higher bit rate)
EDID
:
Sub menu for EDID.
synchronization:
Sub menu for synchronization.
F50 User Manual - Overview
Summary of Contents for F50
