Barco E-2320 C, Service Manual

Page: 47 / 49

Technical specifications
Nio 2-3-5 MP 47
E- 2320 C (SE):
Item Specification
Picture panel 20.1-inch diagonal viewable
screen TFT (thin film transistor)
active matrix, color liquid crystal
display
Resolution Native: 1600 x 1200
Display area (H x V) 408 x 306 (mm)
Viewing angle
(typical, @ 10/1 contrast) Vertical: 176º
Horizontal: 176º
Pixel Pitch 0.255 mm (H) x 0.255 mm (V)
Native color resolution 24 bit color
Luminance 180 cd/m² (calibrated)
Contrast ratio (typical) 900/1 (on/off in dark environ-
ment)
Response time 8 ms typical (@ 25° C after 30
min warm-up)
Controls Push / turn control wheel for
stand-by switching and OSD con-
trols
Input connectors DVI single link, D-Sub15 pin
Signal systems DVI Digital, RGB Analog
Video on DVI: Complying to DVI
Rev 1.0 specifications
Sync on DVI: Complying to DVI
Rev 1.0 specifications
Input signals Possible resolutions:
• 640 x 480 @ 60, 75, 85, 100 Hz
• 800 x 600 @ 60, 75, 85, 100 Hz
• 1024 x 768 @ 60, 75, 85, 100
Hz
• 1152 x 864 @ 75 Hz
• 1152 x 870 @ 60, 85, 100 Hz
• 1280 x 1024 @ 60, 75, 85 Hz
• 1600 x 1200 @ 59, 60 Hz (*)
USB standard supported USB 1.1
Power source Input for 12 VDC power supply
unit: 90 ~ 264 VAC
Input for display: 12 VDC. (The
supplied 12VDC power supply
must be used)
Power consumption 64 watts (max., at 90 VAC, max-
imum backlight, USB load)