Packaging instructions
42
Nio 2-3-5 MP
Attention
: The buffer pieces are not identical.
11. Put the other buffer piece on the other side of the display.
12. Open the cardboard box and turn it 90 degrees.
13. Push a cardboard buffer piece in the cut-away in the foam buffers
at the front side of the display.
14. Slide the display into the cardboard box, with its foot going first.
15. Put the box upright.
16. Put the T-shaped foam buffer piece behind the display in the box.
Push it down behind the display foot to fix the foot during trans-
port.
17. Put the accessory box inside the box at the rear of the display.
There are cut-outs in the foam buffer pieces for the accessory box.
Cardboard buffer
Summary of Contents for E-2320 C
