Quick Start Guide — Operators
Projector Features
Used to configure the projector for each show. Each
button is linked to a list of commands (called a
“Macro”) as defined in the Communicator software.
Press once to turn the lamp on.
Press once to turn the lamp off.
= Green
= Red
Press to enable and cycle through
4 test patterns. To return to
normal operations, press a fifth
time, or select a macro. Note that
the button turns green when boot-
up is complete.
Positions the image on screen.
Used for manual override.
Increases or decreases image size.
Adjusts primary image focus.
This security feature must be used
if the projector’s light engine
compartment is opened, or if any
boards are removed.
Keypad
Input Module
These features are not
typically used for normal
operations. The video
server sends commands to
the projector to control
these functions.
HD-SDI Module
Press once to open the dowser.
Press once to close the dowser.
= Green
= Red
Accepts an encrypted content data stream
from the server. LEDs indicate sync status,
and if the input is selected.
Accepts data signals from alternative
content devices. LEDs indicate sync
status, and if input is selected.
Used for communication from projector to server and
theater management system. Also used for laptop
connection, for upgrades and running Communicator.