Barco DB-220, Installation Manual

Page: 72 / 87

4. Physical installation of the DB-220 Display
Image 4-77
Note: For the clearness of the pictures, the Velcro strip has been suppressed in the following illustrations.
Install the mounting plate which contains the compact link as followed:
a) Loosen the wings on the top of the mounting plate.
Image 4-78
b) Insert the compact link in the C-beam on the left side of the power box as illustrated. First position the top hooks in the C-beam
and then lower down the compact link until the bottom hooks are positioned in the C-beam.
1
2
2
1
Image 4-79
c) Position the compact link and fasten the wings on the top of the mounting plate.
3. Open the left slide door which already contains the AEC cable.
AEC Cable
Image 4-80
68 R59770240 DB-220 11/06/2009