Barco DB-220, Installation Manual

Page: 38 / 87

4. Physical installation of the DB-220 Display
4.3 Mounting the AEC-4000
This procedure describes how to mount the AEC-4000 on top of the top segment. For the clearness of the
pictures, the clamps are suppressed in the following illustrations.
Necessary tools
• 9/16” box-end wrench.
• Adhesive tape.
How to mount the AEC-4000?
1. Mount the support bracket as illustrated.
B
Image 4-12
2. Install the AEC satellite upon the support bracket as illustrated. Use four bolts to secure the AEC sensor.
Caution: Make sure that nothing is obstructing the front and rear side of the AEC sensor.
Image 4-13
3. Connect the AEC cable as illustrated.
Image 4-14
4. Wind up the AEC cable (C) and stick it on the bottom of the top segment using some tape (S).
34 R59770240 DB-220 11/06/2009