7-7
Service Mode
5975589 BARCODATA 708 HS 080998
Deletion of all blocks
Highlight
'delete all blocks'
with the control disk and press
ENTER
.
ENTER
gives a confirmation message before deleting.
EXIT
returns to the Path Selection main menu.
If you are certain you wish to delete all blocks, press
ENTER
to
confirm, otherwise press
EXIT
to return.
Once
ENTER
is pressed, all block headers and adjustment settings
are permanently removed and cannot be restored.
All Settings to Midposition
Item is password protected.
Highlight
'All settings to midposition'
with the control disk and press
ENTER
to set all settings to their midposition.
A confirmation menu will be displayed first.
ENTER
displays a Confirmation screen.
EXIT
returns to the Service menu.
ENTER
will set all settings to their midposition.
EXIT
will cancel the
operation to set all settings to their midposition.
Undo All Settings to Midpos
When "All settings to midpos" is selected, all settings are set to their
midposition. To cancel this action, select 'Undo all settings to midpos'
by pushing the control disk up or down and press ENTER. 'Undo all
settings to Midposition' is displayed in the Memory management menu
in stead off 'All settings to midposition' when this latter is pressed.
An undo is possible as long as the projector is playing on the same
source (= same adjustment block) even when some adjustments as
geometry or convergence are already readjusted. When undo is
pressed all settings are reset to the previous settings.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GREEN CONVERGENCE MID
DELETE ALL BLOCK
All 32 blocks
will be deleted !
<ENTER> to confirm
<EXIT> to cancel
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GREEN CONVERGENCE MID
SET TO MIDPOSITION
All settings
on current block
will be over-written !
<ENTER> to confirm
<EXIT> to cancel
Select with
ê
or
é
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
UNDO ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GREEN CONVERGENCE MID
Summary of Contents for DATA 708HS R9002230
