![background image](http://html1.mh-extra.com/html/barco/data-708hs-r9002230/data-708hs-r9002230_owners-manual_473988034.webp)
6-12
Random Access Adjustment Mode
5975589 BARCODATA 708 HS 080998
25
23
9
15
17
24
22
8
14
16
5
4
1
2
3
20
18
6
10
12
21
19
7
11
13
Select with
ê
or
é
then <ENTER>
<EXIT> to return.
CONVERGENCE
Select with
ê
or
é
then <ENTER>
<EXIT> to return.
HORIZONTAL SIDES
VERTICAL CORNERS
COARSE ADJUSTMENT
COARSE ADJUSTMENT
RED ON GREEN
BLUE ON GREEN
FINE ADJUSTMENT
GREEN ONLY
RED ON GREEN
BLUE ON GREEN
Convergence Adjustment
Convergence adjustments affect both the horizontal and vertical
lines of the setup pattern. These adjustments are performed on the
red image while superimposed on the green image and then on the
blue image while superimposed on the green image.
Note : the green convergence adjustments can be added as an option.
When these are available, start always with 'green only'. This option
will also be indicated on the convergence menu.
Highlight first 'Green only' when available by pushing the control disk
up or down and press ENTER to display the convergence adjustment
menu.
The screen area is divided into 25 areas.
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
CONTRAST MODULATION
Select with
ê
or
é
then <ENTER>
<EXIT> to return.
COARSE ADJUSTMENT
RED ON GREEN
BLUE ON GREEN
FINE ADJUSTMENT
GREEN ONLY
RED ON GREEN
BLUE ON GREEN
CONVERGENCE
Coarse Convergence Adjustment.
Highlight 'Red on green' under the coarse convergence item and
press ENTER. The coarse convergence menu will be displayed.
The following items are possible :
- Horizontal sides : adjust the vertical lines, within a certain area,
on both sides without influencing the lines on the middle of the
image.
- Vertical corners : adjust the horizontal lines in the four corners,
within a certain area, without influencing the middle of the image.
Repeat for 'blue on green'
Horizontal sides
Highlight 'Horizontal lines' and press
ENTER
to start the adjustment.
To make a coarse adjustment of the red or blue vertical lines in zone
3 and 5 simultaneously.
G
G
B
B
R
R
Hint :
- look to the end of scan and adjust until the red or the blue vertical
lines are on the green lines or as close as possible to the green lines.
- during these adjustments, the horizontal convergence adjustments
in zones 2, 3, 4 and 5 will be set to midposition (barscale 50).
Vertical corners
Highlight 'Vertical corners' and press
ENTER
to start the adjustment.
To make a coarse adjustment of the red or blue horizontal lines in zone
10, 14, 18 and 22 simultaneously.
Hint :
- Adjust until the red or the blue horizontal lines are on the green lines
or as close as possible to the green lines.
- During these adjustments, the horizontal convergence adjustments
in zones 10 to 25 will be set to midposition (barscale 50).
Summary of Contents for DATA 708HS R9002230
