Barco DATA 708HS R9002230 Owner'S Manual Download Page 21

Page: 21 / 59

5-1

Start Up of the Adjustment Mode

5975589 BARCODATA 708 HS 080998

START UP OF THE ADJUSTMENT MODE

Adjustment Mode

All picture geometry and convergence adjustments are made while in the 'Adjustment mode'. To enter the adjustment mode :

ADJUSTMENT MODE

Select a path from below:

IRIS

GUIDED

RANDOM ACCESS

INSTALLATION

SERVICE

source 1

Select with

then <ENTER>

<EXIT> to return

WARNING

RISK OF ELECTRICAL SHOCK

NO USER ADJUSTABLE PARTS INSIDE

THE FOLLOWING

INSTALLATION MENUS

ARE RESERVED TO,

AND TO BE PERFORMED ONLY

BY BARCO PERSONNEL, OR

BARCO AUTHORIZED DEALERS

IF QUALIFIED, PRESS

<ENTER> TO CONTINUE, OR

IF NOT, <EXIT> TO RETURN.

Press the

ADJUST

key.

The projector displays the path selection menu.

You are now in the

'Adjustment mode'

. The control disk is used to

make menu selections and also vertical and horizontal adjustments.

The

ENTER

and

EXIT

keys are used to move forward and backward

through the menu structure. The

ADJUST

key can be used to

terminate the adjustment mode while a path selection menu (head

menu) is displayed.

There are 5 possible paths to follow once in the Adjustment mode.

They are :

IRIS

- This selection will only be available when the auto-alignment

unit IRIS is connected to the projector.

GUIDED

- Guided should be selected if the user intends to perform

a complete alignment of the projected image. All of the necessary

geometry and convergence adjustments are made in a predeter-

mined sequence.

RANDOM ACCESS

- Random Access should be selected if the user

intends to make only a few adjustments.

INSTALLATION

- Installation should be selected if the projector has

been relocated and/or a different screen size is desired.

When selecting 'Installation', the user or operator will be warned to

call a qualified technician to perform the installation procedure (see

example of projected warning on next page).

SERVICE

- Service should be selected if the user intends to delete

blocks, change password or apply information.

While in Guided or Random Access adjustment Mode, the user may

use an external source, an internally generated genlocked pattern or

an internally generated multi-frequency cross hatch pattern as a

setup pattern.

Warning during the start up of the installation mode.

Summary of Contents for DATA 708HS R9002230




























































Search results

Summary of Contents for DATA 708HS R9002230

Reviews:

Brands by name

Popular brands

Barco DATA 708HS R9002230, Owner'S Manual

Search results

Summary of Contents for DATA 708HS R9002230

Reviews:

Brands by name

Popular brands