![background image](http://html2.mh-extra.com/html/barco/cx-50/cx-50_installation-manual_3855994071.webp)
R5900096 /00
CX-50
71
6.10 Audio settings
About the audio settings
The audio functionality can be disabled or enabled. When the enable and/or disable setting is changed, the
Buttons must be re-paired before the setting becomes active.
Image 6-17: Audio settings
How to change
1.
Log in to the
Configurator
.
2.
Click
Display & Audio
→
Display & Audio
.
3.
Check or uncheck the check box next to Enable Audio.
Checked: audio is enabled.
Unchecked: audio is disabled.
4.
To select the audio output, click on the drop down box and select the desired audio output.
Jack: audio output via jack.
HDMI: audio output via HDMI.
SPDIF: digital audio ouput via TOSLINK
5.
Click on
Save changes
to apply the new settings.
6.11 WiFi settings
WARNING:
It is not allowed to operate the Base Unit outside its intended geographical region.
About WiFi
A connection with the Base Unit can be made via a wireless connection. A fixed wireless IP address is used to
establish the connection.
The transmission power of the wireless signal can be reduced.
An overview of the current settings is given when
Wi-Fi Settings
is selected and operational mode is
Access
Point
.
Summary of Contents for CX-50
