Barco Coronis Uniti MDMC-12133, User Manual

Page: 35 / 60

5. Advanced operation
5.11 I-Luminate fi lm position
About the I-Luminate fi lm position
By default, the I-Luminate rectangle comes up in the top/center of the left part of the screen. This position
can be changed to top/left or top/right corner of the left part of the screen or top/left, top/center or top/right
corner of the right part of the screen.
To set the I-Luminate fi lm position:
1. Bring up the OSD main menu.
2. Navigate to the Con fi guration > I-Luminate menu.
3. Enter the Film Position submenu.
4. Select Left Side Top Left/Center/Right or Right Side Top Left/Center/Right as desired and con fi rm.
5.12 Luminance target
About the luminance target
The luminance target of your Coronis Uniti is adjustable over a prede fi ned range. When you change the
luminance target, the display will adjust its backlight to reach the target.
To set the luminance target:
1. Bring up the OSD main menu.
2. Navigate to the Con fi guration > Calibration menu.
3. Enter the Luminance Target submenu.
4. Set a luminance target value as desired and con fi rm.
The default, factory DICOM calibrated luminance value is available in the technical spec-
i
fi cations table. The guaranteed backlight lifetime is valid for this setting.
5.13 Color presets
About color presets
The available color preset settings for your display are:
Clearbase Simulation of the clearbase fi lm color temperature.
Bluebase Simulation of the bluebase fi lm color temperature.
User When selecting the User color temperature setting,
you will be able to manually de
fi ne the X and Y
coordinates or the display color temperature in
separate submenus.
Native White The native, unmodi fi ed color temperature of the
LCD panel.
To select a color preset:
1. Bring up the OSD main menu.
2. Navigate to the Con fi guration > Calibration > Color Settings menu.
K5902079 CORONIS UNITI 21/04/2015 33