Adjusting Luminance and Color
55
edit mode. Use Up
or Down
to change the value. Use Enter
to save the changes.
9.
To modify the color temperature in (x,y) co-ordinates, first make
sure the color target is defined in (x,y) co-ordinates (see step 5).
Use Up
or Down
to select
x
or
y
. Use Enter
to go into edit
mode. Use Up
or Down
to change the value. Use Enter
to save the changes.
Tips
• If you only need to change the luminance target, it is not
necessary to open the Color Definition submenu. You can
change the luminance target in the Luminance and Color
menu. The new value will automatically be saved in the color
definition as well.
• You can restore the (x,y) values to factory defaults by
selecting
Restore Factory x,y values
.
Summary of Contents for Coronis Elite
