Display controls
29
To display the OSD (on-screen display). In the OSD, this button
acts as Enter button to make selections.
4.
Standby
To put the display in standby mode.
5.
Ambient light sensor
Senses the ambient light around the display. The ambient light
measurement can be taken into account in the DICOM display
function calibration.
6.
Power LED
Indicates the display’s power status.
Green:
Display is on (when enabled in the OSD).
Orange:
Display is in Standby power-saving mode.
Off:
Display is disconnected from the power or the LED’s on state
is disabled in the OSD.
Note:
When the LED is disabled in the OSD, it will still be
activated (green) when the display is on but does not receive
any video signal.
7.
I-Guard sensor
Constantly measures and stabilizes the display light output and
(on a color display only) color temperature.
How to use the controls
1.
When the OSD is not on the screen, touch any of the soft touch
keys.
The front illumination is switched on for about 10 seconds.
2.
While the illumination is on, touch the Enter
touch key to
display the main menu. It contains several submenus.
Summary of Contents for Coronis Elite
