![background image](http://html1.mh-extra.com/html/barco/coronis-elite/coronis-elite_user-manual_3888040030.webp)
Display controls
30
3.
To open a submenu, use the Up
or Down
touch keys to
select the submenu. Next, press the Enter
touch key to open
the submenu.
4.
To exit from a submenu, use Up
or Down to select
EXIT
.
Next, press Enter
.
If you exit from the Main Menu, you exit the OSD.
5.
To change an adjustment value or setting, use Up
or Down
to select the adjustment or setting. Next, press Enter
to go
into edit mode. This is indicated by the scroll bar becoming
longer.
Figure 6: Setting is selected
Figure 7: Edit mode is active
Use Up
or Down to change the value. Use Enter
to
confirm the change.
Changes are saved automatically after confirming.
6.
Some items in the menus cannot be changed. They are read-
only values, displayed in light gray.
Tip:
While you are adjusting a value:
• Touching Up and Down at the same time resets to the last
stored value.
SETTINGS
DPMS
On
Power LED
On
User Controls
On
EXIT
SETTINGS
DPMS
On
Power LED
On
User Controls
On
EXIT
Summary of Contents for Coronis Elite
