Changing Display Functions
48
ALC & DICOM Options
DICOM offset
Introduction
DICOM DF will be recalculated
only
when another DICOM Offset is
selected. The DICOM DF will be recalculated based on the new offset
setting.
To select a DICOM offset:
1.
Select the DICOM display function. See
To select a display
function (DF):
, on page 46.
2.
In the ALC & DICOM Options menu, use Up
or Down
to
select
DICOM Offset
. Use Enter
to go into edit mode.
3.
Use Up
or Down
to select an offset.
4.
Use Enter
to save the changes.
You can select the following offsets:
Value
Description
Dark Room
The DICOM DF will be recalculated tak-
ing an ambient light value of 0 lux into
account.
This means that the measured ambient
light does
not
influence the DICOM DF.
Preset
The DICOM DF will be recalculated tak-
ing a preset ambient light value into
account. This value is determined by the
selected Reading Room and can be
adjusted manually within certain limits.
Summary of Contents for Coronis Elite
