Barco Coronis 3MP Installation & User Manual Download Page 73

Page: 73 / 80

MediCal Pro installation and operation

MediCal Pro software installation

Install MediCal Pro on the PC. Follow the instructions from the
MediCal Pro User Guide.

Important

: Do not forget you have to have Administrator

privileges to install or uninstall MediCal Pro.

Using MediCal Pro

You can now use MediCal Pro to configure the complete
configuration and set up the Q/A tasks.

Proceed as follows:

1. Start MediCal Pro. If appropriate, you can connect to MediCal

Administrator.

2. Set up the configuration in MediCal Pro by using the

Configuration Setup wizard.

3. If necessary, align the displays' geometry settings.

4. For all the displays in the system, check if the DPMS setting

is turned on. Therefore, right-click on the display icon and
select Properties... from the drop-down menu. Then click on
Details...

Check if the Powersave option is checked. If not, check it.
This is necessary to use the DPMS possibilities of the display
controller.

5. For all the displays in the system, define (if necessary) and

select a Preset.

6. After selecting the Preset, MediCal Pro starts consistency

calibration automatically.

7. Define the Q/A task schedule.

Summary of Contents for Coronis 3MP

















































































Search results

Summary of Contents for Coronis 3MP

Reviews:

Related manuals for Coronis 3MP

Brands by name

Popular brands

Barco Coronis 3MP, Installation & User Manual

Search results

Summary of Contents for Coronis 3MP

Reviews:

Related manuals for Coronis 3MP

Brands by name

Popular brands