45
BarcoMed control panel settings
This chapter describes how to configure the displays in your
Barco Medical Imaging Display System using the tools available
through the
Advanced
button on the
Settings
tab of the
Windows
Display Control Panel
.
Accessing the Barco tab
Note:
You must have logged on to Windows using an account
with administrator privileges in order to use the Barco portions of
the “Windows Display Control Panel” to change any display
settings.
1. Open the “Windows Display Control Panel” by one of the two
methods below:
a) Start > Settings > Control Panel > Display
or
b) Open the “Display Properties Control Panel” by right
clicking in an empty area on the desktop, then select
“Properties”
.
2. Click on the
“Settings”
tab.
3. Select the
“rectangle”
that represents the Barco display
whose settings you wish to change.
4. Click on the
“Advanced”
button.
5. Select the
“Barco”
tab from the Properties screen.
Using the Barco tab
The Barco tab is divided into three sections. The first section
provides information about the graphics controller and allows
access to the graphics controller advanced configuration pages.
The second section provides information about the display. The
bottom section allows access to two Barco tools, Barco System
Report and Barco’s softcopy QA solution, MediCal QAWeb,
MediCal Pro or Niowatch, depending on which solution is
Summary of Contents for Coronis 3MP
