Barco Coronis 21-inch Installation & user manua, Installation And User Manual

Page: 76 / 119

Display operation
76
4.
Rotate the control wheel to select
User Controls
.
5.
Press the control wheel to switch from “On” to “Off”.
6.
Exit the menus.
To enable user controls:
1.
Make sure the on-screen display is not on the screen.
2.
Do not use the control wheel for at least 3 seconds.
3.
Rotate the control wheel 1 step clockwise.
4.
Press the control wheel 2 times.
5.
Rotate the control wheel 1 step counterclockwise. The on-screen
display appears.
Note:
Steps 2 to 4 must be performed in maximum 3 seconds.
6.
Rotate the control wheel to select
Settings
.
7.
Press the control wheel to enter the Settings menu.
Figure 27: Settings menu
8.
Rotate the control wheel to select
User Controls
.
9.
Press the control wheel to switch from “Off” to “On”.
10.
Exit the menus.
SETTINGS
DPMS On
Power LED On
User Controls Off
EXIT