Barco Coronic Uniti, User Manual

Page: 46 / 74

K5902079-07 Coronis Uniti 46
5.26 Input interface standard version
About Input interface standard version
The Coronis Uniti supports two input interface standard versions: DPCD V1.1 and DPCD V1.2
To select the EDID format
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Image Sources > Input Settings > DisplayPort1/2 menu.
3. Enter the Input interface standard version submenu.
4. Select one of the available versions and confirm.
To obtain full resolution (2100 x 2800) and full refresh rate (60Hz), DPCD V1.2 should be selected.
5.27 EDID format
About EDID format
The Coronis Uniti supports two EDID formats: E-EDID V1.4 and DisplayID V1.3
To select the EDID format
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Image Sources > Input Settings > > DisplayPort 1/2 > EDID menu.
3. Enter the EDID format submenu.
4. Select one of the available format and confirm.
5.28 EDID timings
About EDID timings
Following EDID timings are available for your Coronis Uniti:
Refresh Rate Allows to manually select the refresh rate of the image
source video input signal depending on the maximum
refresh rate of the display controller connected to your
display.
Color Depth Allows to change the color depth to 8 or to 10 bit.
To manually set EDID timings:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Image Sources > Input Settings > DisplayPort 1/2 menu.
3. Enter the EDID submenu.
4. Select Resolution, Refresh Rate, Preferred Orientation or Color Depth .
5. Select one of the available settings and confirm.
Advanced operation