K5902079-07
Coronis Uniti
14
3.1 Removing the connector compartment cover
The connector compartment cover should be removed to get access to the connectors.
To remove the connector compartment cover
1.
Gently push the two lips on the top of the cover.
2.
Pull the top of the cover slightly away from the display and lift the cover upwards.
3.
Remove the cover.
3.2 Unlocking the tilt mechanism
In the factory, the tilt system in the display stand is locked with a red pin to prevent damage during
transportation. You
’
ll have to remove this pin before adjusting your display position.
Push the display against the buffer part to easily remove the pin.
To remove the pin:
1.
Position the display with its rear side facing you.
2.
Pull out the red pin in the display stand.
Summary of Contents for Coronic Uniti
