Barco Coronic Uniti, User Manual

Page: 24 / 74

K5902079-07 Coronis Uniti 24
WARNING: To avoid muscle strain or back injury, use lifting aids and proper lifting techniques when
removing or replacing.
Overview
The panel, standard attached to the tilt & swivel foot, is compatible with the VESA 200 x 100 mm and VESA
100 x100 mm standard. So it can be used with an arm stand according to the VESA 200 x 100 mm or VESA
100 x 100 mm standard.
Therefore, the tilt & swivel foot must be removed from the panel.
1. Fasten the height mechanism of the foot by putting the red pin in the hole “ Unlocking the height
mechanism ” , page 15.
2. Put the display face down on a clean and soft surface. Be careful not to damage the panel screen.
3. Loosen the plastic covers with a cross head screwdriver.
4. Remove the two plastic covers.
Display installation