Barco CLM HD8 User Manual Download Page 159

Page: 159 / 231

14. Service menu

14.3 Diagnosis

What can be seen?

The diagnosis menu gives the possibility to get an overview of the working of the projector.

14.3.1 How to start up the diagnosis?

Start up

1. Press

MENU

to activate the menus.

2. Use the

▲

▼

key to select

Service

and press

ENTER

The service window opens.

3. Use the

▲

▼

key to select

Diagnosis

and press

ENTER

The diagnosis screen will be displayed.

Image 14-5

Image 14-6

Image 14-7

14.3.2 Versions

How to display an overview?

1. Press

MENU

to activate the menus.

2. Use the

▲

▼

key to select

Service

and press

ENTER

The service window opens.

3. Use the

▲

▼

key to select

Diagnosis

and press

ENTER

The diagnosis screen is displayed.

4. Use the

▲

▼

key to select

Versions

and press

ENTER

The Versions overview is displayed.

To see also the package info and to make a comparison with the current version, press on

►

An indication is given of the current installed software is equal, smaller then or greater then the one in the package.

Image 14-8

Image 14-9

Image 14-10

R59770057 CLM HD8 15/03/2010

155

Summary of Contents for CLM HD8








































































































































































































































Search results

Summary of Contents for CLM HD8

Reviews:

Related manuals for CLM HD8

Brands by name

Popular brands

Barco CLM HD8, User Manual

Search results

Summary of Contents for CLM HD8

Reviews:

Related manuals for CLM HD8

Brands by name

Popular brands