Barco CLM HD8 R9050130, User Manual

Page: 64 / 197

8. Input menu
Image 8-5
Image 8-6
Image 8-7
When:
None Output is locked on an internal sync (60 Hz)
Automatic Output is locked on the selected input for the main window
Input 1
Output is locked on source 1
Input 2 Output is locked on source 2
8.4 Minimum delay
Purpose
In normal mode, the processing (scaling and de-interlacing) in DLP projectors introduces a few frames delay (from input to screen).
Setting the option
Minimum Delay
to "ON" disables all scaling and de-interlacing in the processing and reduces frame delay of the
projector (from input to screen) to ONE frame, caused by the formatter board (DLP technology restriction). The intended use of this
option is to apply native and progressive data to the projector and displaying it with minimum delay, using the full resolution of the
projector. Other formats will be displayed either unscaled and/or interlaced.
This feature can be used if additional delay in the projector is not acceptable. For instance if a projector is showing the DVI loop out
of another DLP or if an external scaler/de-interlacer does the processing.
How to toggle the delay?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select
Input
and press ENTER .
The Input menu is displayed.
3. Use the ▲ or ▼ key to select
Minimum delay
and press ENTER to toggle between [On] and [Off].
Image 8-8
Image 8-9
60 R59770057 CLM HD8 16/07/2007