Barco CINE7 R9010040, Owner'S Manual

Page: 27 / 115

4. Getting Started
Remote control functions.
This remote control includes a battery powered infrared (IR) transmitter that allows the user to control the projector remotely. This
remote control is used for source selection, control, adaptation and set up. It includes automatic storing of picture controls (Bright-
ness, Sharpness...) and settings.
Other functions of the remote control are :
• switching between stand by and operational mode.
• switching to "pause" (blanked picture, full power for immediate restarting)
• direct access to all connected sources.
4.3 Terminology overview
Overview
The following table gives an overview of the different functionalities of the keys.
Image 4-3
RCU function indication
1 Function keys user programmable keys with functions for direct access.
2 ADJ. Adjust key, to enter the adjustment mode
3 Address key (recessed key), to enter the address of the projector (between 0 and 9). Press the recessed
address key with a pencil, followed by pressing one digit button between 0 and 9.
4 Selection key (*) to direct access the zoom/focus/shift functions.
5 PAUSE to stop projection for a short time, press ’PAUSE’. The image disappears but full power is
retained for immediate restarting.
R5976584 BARCO CINE7 26022003 23