![background image](http://html1.mh-extra.com/html/barco/cine-versum-50/cine-versum-50_owners-manual_3837666031.webp)
6. IMAGE DISPLAY ON/OFF
6. IMAGE DISPLAY ON/OFF
6.1 Starting Image display (from standby mode)
How to start image display with the RCU
1. Make sure that the connected sources to the Cine VERSUM Master are turned on.
2. Using the digit button on the Remote Control, key in the corresponding slot number (from 1 to 8). (image 6-1)
The Cine VERSUM Master powers up and starts on its turn powering up the connected displays. Image of the selected source
appears on the different displays.
3. Using the standby button on the Remote Control, press the standby button. (image 6-2)
The Cine VERSUM Master powers up and starts on its turn powering up the connected displays. The image of the last selected
source will be redisplayed on the different displays.
Image 6-1
Digit buttons on Remote Control
Image 6-2
Standby button on Remote Control
6.2 Interruption Image Display (to standby mode)
How to interrupt image display
1. Press the standby button on the Remote Control again. (image 6-2)
The Cine VERSUM Master switches to the standby mode and switches on its turn the connected displays into the standby mode.
Important: before the Cine VERSUM 80 switches into the standby mode, a cool down period of about 1 min. is inserted. This
mode is indicated by the standby LED which blinks at a beat of 0.3 on/0.3 off. During this period, restarting image display on the
Cine VERSUM 80 is disabled.
R5976490 CINE VERSUM SYSTEM 06092002
25
Summary of Contents for Cine VERSUM 50
