Barco Cine VERSUM 50, Owner'S Manual

Page: 15 / 37

3. OVERVIEW USER’s CONTROLS
3. OVERVIEW USER’S CONTROLS
Overview
• On Cine VERSUM Master
• On Cine VERSUM 50
• On Cine VERSUM 80
• On InfraRed Remote Control
3.1 On Cine VERSUM Master
Front View
The front side of theCine VERSUM Master is provided with the following controls:
Image 3-1
Front side Cine VERSUM Master
Controls function description
Ref. Function Description
1 Infra Red Reception LED indicator Lights up when a valid IR signal from the Remote Control has been
captured.
2 Infra Red Receiver Infra Red reception diode for the IR signals from the IR transmitter
3 Standby LED Blinks when the Cine VERSUM Master has been powered down to
Standby or Economy Standby mode.
4 Push button main power switch Button pressed, switches the Cine VERSUM Master in:
• the ’powered up’ mode if the latest Master status was ’Operation
mode’.
• the ’standby’ mode if the latest Master status was ’standby’ or
’Economy standby’ mode.
5 Blue Dot Matrix display with white LED
backlighting This display indicates the status of the Cine VERSUM Master and also
the items when navigating through the different menu’s.
6 Start up and Random access adjustment
mode selection knob All source parameters and picture tuning are setup in the adjustment
mode.
Table 3-1
3.2 On Cine VERSUM 50
Rear and Front view
The only hardware control on the Cine VERSUM 50 is the Main Power Switch (1), located at the backside of the screen itself.
This switch puts the Screen in the OFF or Standby position. From the Standby position, operation mode is controlled by the Cine
VERSUM Master.
The status of the Plasma screen is indicated by a blue LED (3), located at the bottom on the right of the screen. In the same corner
an IR LED (2) is mounted to allow controlling the Cine VERSUM system via the screen.
R5976490 CINE VERSUM SYSTEM 06092002 9